Page 2 of 2
Re: new board member/owner of 1vj
Posted: Mon Jul 02, 2012 11:14 pm
by socks

Jibber
I would be inclined to go with what Olli says on keeping the bike you have. Besides that one in the Yard looks a little over priced for whats there, it looks as if someone has taken the best parts and put yours together as a running bike, but youve seen and heard them so your call really.
If you dont go for them tell us about them bikes left in the yard would you. I'm sure one or two here might be intrested if the seller would take a much lower offer!
Nobody offered these out as a welcome yet so
socks
Re: new board member/owner of 1vj
Posted: Tue Jul 03, 2012 6:51 pm
by jibber
Nice tits.......
sorry guys, did the deal yesterday afty before reading most of the advice, the .5 is still to be delivered

always was one to jump into the deep end

Re: new board member/owner of 1vj
Posted: Tue Jul 03, 2012 7:51 pm
by bopster
Fair do's to you they don't look half bad from here, from none to 3.5 in one fail swoop, will give you many
hours of happy spannering

keep us informed as to what you find, good or bad.
cheers bopster
Re: new board member/owner of 1vj
Posted: Tue Jul 03, 2012 10:14 pm
by Mezo
I can see the thread now, "jibbers triple tenere build"
Triple the fun.
Mezo.
Re: new board member/owner of 1vj
Posted: Wed Jul 04, 2012 6:58 am
by jibber
worst case scenario...............i should get a matching set of indicators out of it

Re: new board member/owner of 1vj
Posted: Wed Jul 04, 2012 9:34 am
by Fred333
Ok, hard to resist.

The breasts...ääähh bikes looking good.
Have fun!
Make a nice restaurationthread for us.
Olli
Re: new board member/owner of 1vj
Posted: Wed Jul 04, 2012 11:08 pm
by socks
Wow look at the plunge line on those three! (In the shed)
Well you have you hands full jibber hope you manage , but maybe one at a time
Keep us posted on how they behave!
The XT's!
And keep us posted on and when you get to work on them.
Socks
Re: new board member/owner of 1vj
Posted: Sat Jul 07, 2012 6:58 pm
by jibber
The vj has started to come apart to refinish the frame a swing arm etc, stripped the .5 down, top end looks ok, slight scoring on one cap, cams fine, bores fine, gears have started to wear though, i thought the tank may have been dent free, but theres a gob of filler, to what extent i dont know, engine number matches the frame....overall...could have been worse. The vj seems to be mostly original to me, coming apart nicely