Page 16 of 16

Re: tt600 36a/59x rebuild

Posted: Fri May 23, 2014 11:27 pm
by Fred333
If you will need more carrier... it´s the very same part from the XV 125. ( even the XV 250 has got the same)
There are plenty on german Ebay right now:
http://www.ebay.de/itm/Yamaha-Virago-XV ... 338ad4f537
Image
see the " 5Y100" on the part?
Just a tip, maybe these bikes are comon in your area as they are here.
Olli

Re: tt600 36a/59x rebuild

Posted: Sat May 24, 2014 8:11 am
by peman
Fred333 wrote:If you will need more carrier... it´s the very same part from the XV 125. ( even the XV 250 has got the same)
There are plenty on german Ebay right now:
http://www.ebay.de/itm/Yamaha-Virago-XV ... 338ad4f537
Image
see the " 5Y100" on the part?
Just a tip, maybe these bikes are comon in your area as they are here.
Olli

Thanks fred333, i need the one that has the flush fitting sprocket mounts and with 5y100 on it yes?
Dam xtrider was right.
That's ok there's one here down south from a xv 250 $50 total. smile:
Thanks for the tip.

Re: tt600 36a/59x rebuild

Posted: Sat May 24, 2014 8:51 am
by peman
Ok been busy doing parts chasing and research :working: and xtrider has come to the rescue with some goods.
Image
xt speedo in kph don't know how he had this. has trip and odo.
Image
Headlight bracket and glass housing and adjustments, saved me a lot of time and money.thanks again
Image
Image
And make it fit here. Bloody pics too dark.
Image
Image
Pretty darn close to fitting, will wait until i get the headlight cowling to make it fit.
Image
Also this is all the tools i need to strip the bike, once i get all the sizes i need i will condense the amount and keep them with me
on long trips.