Page 5 of 5
Re: My XTZ660 93' maintenance / problems and questions
Posted: Fri Apr 27, 2012 10:41 pm
by velja
Anyone remembers if it is possible to remove top cover from carb without removing carburetor? I bought open exhaust and I need more fuel :|
Re: My XTZ660 93' maintenance / problems and questions
Posted: Sat Apr 28, 2012 11:25 pm
by xtzrick
The left hand carb cover comes off easily with the carbs mounted, the cover on the right looks like it could be difficult so never tried it.
I found 1 notch on the needle makes a big difference to carburration & when the engine feels rough you have gone too rich.
Vid of your new pipe please
Rick
Re: Re: My XTZ660 93' maintenance / problems and questions
Posted: Sun Apr 29, 2012 2:39 pm
by Teneroma
velja wrote:My friend called back. His both breather hoses go underneath bike too like mine. There is no doubt that that's not a factory setup but I don't care anymore.
Tomorrow morning I will put the 2 extra T splitters in box where I keep my other garbage. I will put one hose in my left ear just to be certain that everything is in the place. Then I will put tank and fairings back and I am going to ride the damn thing until the sun goes down. I have juicy road nearby and I have friend on KLR. Fck the hoses.
If you need to do any serious water crossing, meaning up rround the bottom of motor, i suggest you move the bottom hoses up higher,like up near battery. Water in carb can be hard to fix.