Mezo wrote:So its four 3AJ`s, one S10, one 1VJ, one 55W & the older 660 that is on the back burner correct?

Mezo.

It's six 3AJ's, two 1VJ's, one 55W, one S10, the older 660, ummm a very sick 34L (it's a Q plate so probably will be used for parts).....

The new Ten & the Tiger...

GeoffD wrote:It's six 3AJ's, two 1VJ's

Must have been asleep?

Mezo.

Problem with this bike is I bought it without an engine, so it's time to drag out my £80 autojumble lump......



Unfortunately .... the bracket where the cam chain guide sits has broken, look closely
& also there's no numbers on it.... which isn't a huge problem, but as I'll be stripping it anyway I'll
have to use my £30 eBay cases....











I've seen a few bodges on these bikes when stripping them, but this is up there with the best / worst of 'em..



Removed all bearings & seals....

Fitted all the new bearings, except one which I may have to buy....... my friend can't find one in the factory, it's a 6305N

GeoffD wrote:Fitted all the new bearings, except one which I may have to buy....... my friend can't find one in the factory, it's a 6305N

what's with the metal tab in the kick start shaft hole?

peman wrote: what's with the metal tab in the kick start shaft hole?

It's a 3AJ engine, doesn't have a kickstart fitted... (although you can retro fit one).

Not only have I got far too many bikes now I also have boxes & boxes of 'stuff'..... how did this happen?

jeeze.....i thought i had a shitload..............erm.......but as it happens

GeoffD wrote:Not only have I got far too many bikes now I also have boxes & boxes of 'stuff'..... how did this happen?

You have an overly sensitive "commit to buy" button.
Have a word with ebay, see if they can fix it

Rick

GeoffD wrote:Mezo came good with the brochure photo.....

Here (thanks to Karls link) i spotted the tank graphics Geoff.



http://www.ebay.com/itm/Coppia-grafiche ... 3cd9187741



http://www.ebay.com/itm/Coppia-grafiche ... 35cedda7a7



http://www.ebay.com/itm/Adesivo-decalco ... 3cd9b5b556

Mezo.