Page 1 of 1
Fork Dust Seals
Posted: Sun Apr 29, 2018 11:26 am
by matt bristol
I recently rebuilt my forks for my 3TF and replaced the dust seals, but the replacements are different to the original ones.
The original seals fitted against the oil seal and under the retaining clip, however the replacements sent by wemoto fit outside and do not allow me to fit the retaining clip
Not had this before , do you reckon I have the wrong dust seals?
Re: Fork Dust Seals
Posted: Sat May 05, 2018 2:51 pm
by bum bum
Mine too, ended up looking like this
with a gap cause you cant push the dust seal all the way since the circlip is there
Looking at ebay the dust seals come shaped differently from different manufacturers. I still don't know which are the right ones
Re: Fork Dust Seals
Posted: Tue May 08, 2018 12:47 am
by bum bum
matt bristol wrote: Sun Apr 29, 2018 11:26 am
I recently rebuilt my forks for my 3TF and replaced the dust seals, but the replacements are different to the original ones.
The original seals fitted against the oil seal and under the retaining clip, however the replacements sent by wemoto fit outside and do not allow me to fit the retaining clip
Not had this before , do you reckon I have the wrong dust seals?
Which one off of wemoto did you order?
Re: Fork Dust Seals
Posted: Wed May 16, 2018 9:54 pm
by matt bristol
https://www.wemoto.com/bikes/yamaha/xtz ... seals_pair
these ones, don't remember seeing the oem single ones when I ordered, but the photo looks like the ones I wanted.
bugger!
Re: Fork Dust Seals
Posted: Fri May 18, 2018 10:55 pm
by bum bum
So I got the OEM ones off Kedo. Pricey but they fit
