Need a replacement engine for a XT600 1VJ,mine has a ruined crank and crank cases so I would good bottom end would work,Im in the Milton Keynes
but happy to collect from anywhere in the UK.
Andy
Wanted 1VJ engine
-
fast wooly
- No Gold Stars Yet
- Posts: 2
- Joined: Wed Apr 29, 2015 9:19 pm
- What Bike or Bikes Do You Own?: Spondon RG500,TZR250.CR500 supermoto,Cagiva Mito
- Location: Northampton, UK
-
cadno
- Almost there
- Posts: 775
- Joined: Fri May 06, 2016 9:38 am
- What Bike or Bikes Do You Own?: lot's of Yamahas, quite a few Montesas, two BMWs a KTM and a GPZ1100
- Previously Owned Bikes: Far too many to list
- Location: Bangor UK
Re: Wanted 1VJ engine
there's a bottom end on ebay
https://www.ebay.co.uk/itm/188179805075 ... R57s2syhZw
https://www.ebay.co.uk/itm/188179805075 ... R57s2syhZw
-
charliext1vj
- Halfway there
- Posts: 321
- Joined: Sun Mar 29, 2015 11:12 am
- What Bike or Bikes Do You Own?: 2 XT600s -1VJ, BSA Bantam Trail, CRF1000, BSA B25 if I can find all the bits!
- Previously Owned Bikes: too many to list - XT600s, cr500, KTM 990 Adv, VFR800, RDs, DTs
- Location: Bath, UK
Re: Wanted 1VJ engine
Re-EBAY LINK Thats a 34L non electric start.
Dont limit yourself to a 1VJ though think 3AJ and 3TB and 4PT if you dont mind getting a CDI also. I am not sure if you 1VJ Side casing will fit a 3AJ but maybe?
I most probably have a bottom end but will need to find it and dont know the condition of it.
I assume a short bottom end is ok and you dont need stator casing etc? What is your mechanics like of your e.g. drive shaft etc.
I definately have a matching pair of 3AJ engine casings but I doubt if these will take 1VJ internals.
Dont limit yourself to a 1VJ though think 3AJ and 3TB and 4PT if you dont mind getting a CDI also. I am not sure if you 1VJ Side casing will fit a 3AJ but maybe?
I most probably have a bottom end but will need to find it and dont know the condition of it.
I assume a short bottom end is ok and you dont need stator casing etc? What is your mechanics like of your e.g. drive shaft etc.
I definately have a matching pair of 3AJ engine casings but I doubt if these will take 1VJ internals.
-
Missinglink
- On the ladder
- Posts: 81
- Joined: Sun Aug 28, 2022 8:51 pm
- What Bike or Bikes Do You Own?: Tenere 55W .... T7 and too many others
- Location: Scotland
-
Scumfrog
- On the ladder
- Posts: 127
- Joined: Sat May 15, 2021 7:31 am
- What Bike or Bikes Do You Own?: 1VJ
59x
43F - Previously Owned Bikes: quite a few off and on.
- Location: Cymru
Re: Wanted 1VJ engine
Poor supply of 1VJ parts is a bit of an issue these days.
Saw a rough one in Germany for 1700, had a mind to buy it for parts I need and part out the rest. It sold very quickly though, I imagine to a breaker.
Saw a rough one in Germany for 1700, had a mind to buy it for parts I need and part out the rest. It sold very quickly though, I imagine to a breaker.
-
gobo
- Financial
- Posts: 106
- Joined: Wed Oct 02, 2013 1:29 pm
- What Bike or Bikes Do You Own?: Yamaha Tenere 3AJ
BMW R1150GS
Romet Ogar 200 - Previously Owned Bikes: Yamaha Virago
- Location: France
Re: Wanted 1VJ engine
Hello,
I have a 3tb engine that was adapted to my 3aj (stator + left side cover adaptation). It has 40k km, runs very well. I've kept it for another restoration project that finally will not take place.
I wasn't thinking selling it but it if someone could make good use of it, why not ...
Please PM me if interested
I have a 3tb engine that was adapted to my 3aj (stator + left side cover adaptation). It has 40k km, runs very well. I've kept it for another restoration project that finally will not take place.
I wasn't thinking selling it but it if someone could make good use of it, why not ...
Please PM me if interested