Sorry to ask such a dumb question...just need a bit of clarification for my new to me 3AJ. I've just put a new clutch in the bike and the engine and oil tank are both completely drained. So I need to refill and start it.

I've put a litre of fresh oil in the tank...expecting it to drain into the ...

A bit weird that specs seem to be a bit all over the place. They are supposed to be 620mm, but yours are 633 and Peen's are 627. I do not recall what mine were unfortunately, but the difference in length was deffinitely substantial.

The oil lock piece acts as a hydraulic bump stop for the last millimeters of travel of the fork. You could assemble your forks without it if you don't plan on ever bottoming out your suspension, but such situations are not always planned. It's better to find another one and install it.

I have the same fork springs and yes they are quite difficult to install because of the extra length. Use a socket and extension on the fork cap and lean your body weight on your right arm to compress the spring. With your left hand rotate the fork tube to get the fork cap thread started. Wearing ...

OMG make new ones that fit 3AJ models, i'm pretty sure 1VJ taps are the same or very similar. 01Z3314224 is the part code.

You should probably check the condition of your starter clutch as well.

OMG makes a RH fuel tap, part code is 01Z3314224. Made in Italy, not chinese crap off eBay that breaks after a couple of rides (ask me how i know). I've fitted one to my 3DS and it works fine.

Ok problem solved, you connect everything according to the provided diagram and you run a wire from the blue yellow wire on the 3pin terminal to ground. Everything else stays disconnected. Thank you Andy!

Thank you for your reply
Everything was connected according to the provided diagram.I'm attaching the wiring diagram for the 3AJ.
The black white wire on the Zeeltronic is connected to the same wire on the wiring harness. I understand the kill switch wire is the blue white wire according to the ...

Hello everyone

I'm trying to fit a Zeeltronic igniton unit to my '88 3DS, i have connected everything according to the provided wiring diagram, shorted both the side stand and clutch switch in case it matters but still nothing. The old ignition unit sparks fine. Has anyone fitted one of these? Any ...