maintenance help!

xtzrick
King of Posting
King of Posting
Posts: 1051
Joined: Sun Apr 17, 2011 3:41 pm
What Bike or Bikes Do You Own?: '97 Yamaha XTZ660 Tenere, '79 Suzuki GS750
Previously Owned Bikes: Yamaha RS125, Suzuki GT125, Suzuki GT185, Honda CB250 G5,Kawasaki Z1000J, Kawasaki KL250, Yamaha TZR125, Yamaha XT600E
Location: Socialist Republic of S.Yorks.

Re: maintenance help!

Post by xtzrick »

Jaz1259 wrote:Yes got new rubbers on the way so hopefully will run a lot better.

Another question though the clutch was also slippibg so changing the plates do you know what torque the bolts need tightening to.

Cheers again for help
Use a cross head screwdriver & just "nip" the bolts up.
Any real torque will snap the bosses off the clutch center :rtfi:

& tighten opposite screws a couple off turns at a time to keep an even pressure on the plates so they don't warp.

Rick
User avatar
xtrider
Financial
Financial
Posts: 550
Joined: Mon Jun 17, 2013 11:21 pm
What Bike or Bikes Do You Own?: 88 XT600 Yamaha , , 525XC KTM, '96 Kawasaki KLX650 , '05 Suzuki DRZ400, Suzuki LTR450
Previously Owned Bikes: 91 DR 650 Suzuki, 81 DS250 Suzuki, 73 ?250 Yamaha ,05 KLR650 , '02 DR650 Suzuki, Honda XL600R
Location: Wisconsin, USA

Re: maintenance help!

Post by xtrider »

YUP !!! NOT TOO TIGHT.
'08 Husqvarna TE510 .. //..'05 Suzuki DRZ470 stroker bbore..//..'95 & '96 Kawasaki KLX650 ..//..'88 XT600 ..//.. '86XT600(body)3TB hi comp motor ..//.. '06 Suzuki LTR450 ..//
'09 525XC KTM .. //.. '85 XT600/660 (660 Raptor bottom)
Jaz1259
No Gold Stars Yet
No Gold Stars Yet
Posts: 46
Joined: Wed Jul 17, 2013 3:17 pm
What Bike or Bikes Do You Own?: Yamaha Xt600z Tenere
Previously Owned Bikes: Yamaha Xt600e
Yamaha Xt660Z Tenere
BMW r1100 Gs
Location: louth, lincolnshire

Re: maintenance help!

Post by Jaz1259 »

Cheers for the new plates should arrive today.

Another little question are the oil pumps pretty bullet proof on these? Whilst running I checked the pressure by unscrewing the bolt on top of the filter housing and it shot out 2 foot! Is this an adequate check or do I need to check the the pump also
User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 6108
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: Queensland Australia
Contact:

Re: maintenance help!

Post by Mezo »

Jaz1259 wrote:Another little question are the oil pumps pretty bullet proof on these? Whilst running I checked the pressure by unscrewing the bolt on top of the filter housing and it shot out 2 foot! Is this an adequate check or do I need to check the the pump also
The pump was changed on the next model (3AJ) to give 50% more oil flow around your engine, this pump continued on to the 3TB as it worked well.

You are able to retrofit any XT with the 3AJ pump, it has 3AJ on the casting so you know you have the right one.

Image

Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
Jaz1259
No Gold Stars Yet
No Gold Stars Yet
Posts: 46
Joined: Wed Jul 17, 2013 3:17 pm
What Bike or Bikes Do You Own?: Yamaha Xt600z Tenere
Previously Owned Bikes: Yamaha Xt600e
Yamaha Xt660Z Tenere
BMW r1100 Gs
Location: louth, lincolnshire

Re: maintenance help!

Post by Jaz1259 »

50 percent better flow im definately going to look into that. Better flowing oil makes for a longer lasting engine.

Can I ask Mezo I bought this bike as it was in fairly good conditon. I know of the problems with this model over heating and weak 5th gear. Is there any common mods out there like the oil pump upgrade to mske the engine run cooler. Im wanting this bike for doing long trips on offroading and commuting so want it to be as reliable as possible
Post Reply