tightening torque for front sprocket NUT please.
-
mavis cruet
- No Gold Stars Yet
- Posts: 9
- Joined: Mon Jul 09, 2012 8:38 pm
- What Bike or Bikes Do You Own?: 1vj tenere, bmw r100gs, bmw r100 dakar lookalikey,suzuku dr800,honda xl250.
- Previously Owned Bikes: yamaha dt175mx, suzuki dr350, ktm lc4 400.
- Location: Birmigham, UK
tightening torque for front sprocket NUT please.
does anyone know the torque setting for the large nut with lockwasher that holds the front sprocket on? its probably the same as the later xt600's. cheers.
-
Mezo
- Dashingly Handsome
- Posts: 6108
- Joined: Wed Mar 23, 2011 11:01 am
- What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
- Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
- Location: Queensland Australia
- Contact:
Re: tightening torque for front sprocket NUT please.
80 ft.lb or 110 Nm
Mezo.
Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
-
ferzz
- On the ladder
- Posts: 53
- Joined: Sun Sep 09, 2012 9:17 pm
- What Bike or Bikes Do You Own?: XTZ 750 ADV-Ténéré RetroRaid
XTZ 660 original Marathon 1994 Motor-France
XT 600 Z replica Marathon 1990 Motor-France
MuZ Baghira original Paris-Dakar 1998 Nº 17 Marc Morales Team Challenge 95 - Location: Germany; South-West
- Contact:
Re: tightening torque for front sprocket NUT please.
1VJ got originally no central nut.
The sprocket is fixed with a lock-washer and two screws. The screw's torque is 10Nm.
Are you sure about the engine in your 1VJ frame. Kick and electic starter?
The sprocket is fixed with a lock-washer and two screws. The screw's torque is 10Nm.
Are you sure about the engine in your 1VJ frame. Kick and electic starter?
-------------------------------------------------------------------------------------------
Cheers Boris
-> RetroRaid - rally touring parts
Cheers Boris
-> RetroRaid - rally touring parts
-
mavis cruet
- No Gold Stars Yet
- Posts: 9
- Joined: Mon Jul 09, 2012 8:38 pm
- What Bike or Bikes Do You Own?: 1vj tenere, bmw r100gs, bmw r100 dakar lookalikey,suzuku dr800,honda xl250.
- Previously Owned Bikes: yamaha dt175mx, suzuki dr350, ktm lc4 400.
- Location: Birmigham, UK
Re: tightening torque for front sprocket NUT please.
cheers mezo. yeah its a ivj all right. its a later one though as yamaha changed the output shaft splines (for obvious reasons it seems!!). my girlfriend has 2, one with each type of shaft. its a bugger ordering parts as theyre always listed under the 3aj or later....