Hello I have a 1vj i acquired with no tank. I have purchased a tank[acerbis] but have no front mount assembly. Does anyone have one they can sell me or take a photo so I can make one up please?
Thanks for your help
James
Tank rubber mounts
-
Mezo
- Dashingly Handsome
- Posts: 6108
- Joined: Wed Mar 23, 2011 11:01 am
- What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
- Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
- Location: Queensland Australia
- Contact:
Re: Tank rubber mounts
Its a common question strangely? 
Read here & here Geoff has just fitted one to his 1VJ project but his tank was brand new so im guessing it came with a mounting kit?
Mezo.
Read here & here Geoff has just fitted one to his 1VJ project but his tank was brand new so im guessing it came with a mounting kit?
Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
-
llewdaert
- No Gold Stars Yet
- Posts: 2
- Joined: Fri Apr 04, 2014 9:41 am
- What Bike or Bikes Do You Own?: 1VJ& 34L
- Location: Waratah, NSW
Re: Tank rubber mounts
Thanks for the reply, my tank mount is different . A bolt passes through the tank, and there looks like 20mm clearance between the tank and the frame .
I have made my own now- a stainless top hat sleeve, with 20mm thick rubber block. The sleeve passes through the tank mount holes, then bolts up hard to the frame and compresses the rubber a couple of mm.
Not that hard just time consuming............
I have made my own now- a stainless top hat sleeve, with 20mm thick rubber block. The sleeve passes through the tank mount holes, then bolts up hard to the frame and compresses the rubber a couple of mm.
Not that hard just time consuming............