As those of you who've followed this will know it came to me as a collection of broken incomplete bits so I wasn't too fussed about building it into some sort of improved hybrid, hence the front suspension.
I wanted to update the electrics as the loom was nothing special and had been butchered in places, so I ditched it in favour of the Motogadget set up. I wanted a minimal MX look on the front end which made me go down the electrics through the bars route.
So after much messing about and drilling and threading wires here we have the result...
and on the other side.
I'm made up with it.
The colours are left side from top, yellow for indicator, blue for horn and red for lights.
On the right side from top, yellow for indicator, red for start.
The Motogadget is really intelligent and you can program the buttons to do different things for the duration of the push on the switch, for instance one tap switches the lights on, a double tap switches from dipped to main beam. You can also set at time for the indicators to turn off or just flash a preset number of times depending on button push.
All of the buttons then connect to a two wire CANBUS system which goes back towards the main unit.
