What is Just Dan up to now :headslap:

User avatar
Just Dan
Founding Member
Founding Member
Posts: 216
Joined: Tue Mar 29, 2011 7:30 am
Location: Hobart
Contact:

What is Just Dan up to now :headslap:

Post by Just Dan »

It has been awhile since 34L rebuild and Mezo mentioned that do a thread on what is currently on my work bench.

All was quite one Sunday morning until the phone rang. Andrew’s on the other end yelling. There is a cheap airhead BM up for sale on gumtree and been there for 14 min. After reading the ad. Basically a one owner, only ridden to church on Sundays with only 189,000 km. What could be wrong with that. Other that the bike was in the middle of nowhere and about 4 hrs away.

Since Andrew started this roller coaster ride. I conned Andrew on a public holiday into a 8hr drive and if the bike was ok. I would ride the BM back home. Well the BM has been owned by a farmer and has spent all its life on rough dirt roads. We met the owner in a car park and from a distance the bike did not look to bad.

Cosmetically the bike look challenged and with quite a few farm made bits. I rode it briefly and the brakes didn’t really work and neither did the indicators. The staintune mufflers have got odd dints in them. The owner goes. Oh yeah, the muffler fell off while riding along the highway and we found the muffler six months later. After the council slashed the grass and dints are from the slasher. Same with the pannier lid, the daughter found it a few months later.

I was mumbling to my self. I think, I should have bought a trailer. Andrew goes where is the adventure in that. After parting with some cash, we were away after filling the tank with fuel. Only if I could get the fuel cap to come to come off or get the stater motor to work, an the clutch is like a light switch. Once out on the highway the BM is a real surprise in being a lot better than it looks. Cruising along at 110-120 kph. The engine an gearbox are super smooth.

This is what, I bought for my money and no idea of what it is going to be when it is finished, a GS, cafe racer, traveling bike. No idea.

ImageImage

Home made improvements

ImageImage

This bike has never seen a garage and been on far more dirt than most of the bikes on ADV. I thought, I had hot washed most of the dirt off before starting to pull the bike a part.

Lots of home made wiring. I never thought of having use a dust mask while pulling a bike apart.

ImageImageImage

Even has more dirt in places I have never seen on a BM. Don’t know how the electrics ever worked.

Image

Andy Gadget is coming over tomorrow to give a hand to remove the engine from the frame.

Image
Bacon and eggs...A day's work for a chicken, a lifetime commitment for a pig.
Pye
No Gold Stars Yet
No Gold Stars Yet
Posts: 46
Joined: Sun Feb 12, 2012 9:34 am
What Bike or Bikes Do You Own?: 1996 xtz660
Location: Sheffield, UK

Re: What is Just Dan up to now :headslap:

Post by Pye »

Looking forward to seeing where you go with this! love the airhead beemers! always fancied one as a project myself!
User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 6108
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: Queensland Australia
Contact:

Re: What is Just Dan up to now :headslap:

Post by Mezo »

Me to, im looking forward to some close up shots of the Beemer quirks, cheers for posting Dan. :thumb:

Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
User avatar
Just Dan
Founding Member
Founding Member
Posts: 216
Joined: Tue Mar 29, 2011 7:30 am
Location: Hobart
Contact:

Re: What is Just Dan up to now :headslap:

Post by Just Dan »

At least. I got to ride this one home :lol:

Image

The BM also has some serious side car mounts. The owner thought it would be a good idea to have a side car for the dirt roads. Did not make it off the property before crashing into a fence. Every thing about this bike has story.

Image

The air head is keeping the 1100s company.As it is also in bits at the moment :eekers:

Image
Bacon and eggs...A day's work for a chicken, a lifetime commitment for a pig.
User avatar
Just Dan
Founding Member
Founding Member
Posts: 216
Joined: Tue Mar 29, 2011 7:30 am
Location: Hobart
Contact:

Re: What is Just Dan up to now :headslap:

Post by Just Dan »

A nice sunny winter Saturday morning. Head says go for a ride while the weather is good. Nah.. The garage is warm.

Hope I can remember where the wiring goes :omg: Looking like the Tenere in more an more. At least I have a brand new wiring loom for this one,

Image

Looks like breaking out the tig to fix those holes that should not be there.

Image

The rectifier has seen better days.

Image

And the fork caps with pipe tape on the treads.

Image

I was hoping not have to pull the engine apart on this one. The motorcycle shop used Silastic on the base gaskets an most likely will have squeezed into the oil galleries for the heads.

Image

The end of the arvo. It looks like this.

Image
Bacon and eggs...A day's work for a chicken, a lifetime commitment for a pig.
User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 6108
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: Queensland Australia
Contact:

Re: What is Just Dan up to now :headslap:

Post by Mezo »

I think it will be good to pull the engine apart Dan, get everything overhauled & blasted nice & clean.

Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
User avatar
Just Dan
Founding Member
Founding Member
Posts: 216
Joined: Tue Mar 29, 2011 7:30 am
Location: Hobart
Contact:

Re: What is Just Dan up to now :headslap:

Post by Just Dan »

That would a great idea.

Most likely, I will doing the cleaning by hand. On the engine side. The motor needs a new timing chain, starter motor,alternator & coils.
Bacon and eggs...A day's work for a chicken, a lifetime commitment for a pig.
GeoffD
Founding Member
Founding Member
Posts: 1700
Joined: Sun Mar 27, 2011 7:19 pm
What Bike or Bikes Do You Own?: 7 x 3AJ Teneres
1 x 1VJ Tenere
55W Tenere
XT660 Tenere 4MY
Honda CRF1000 Africa Twin
Honda Monkey Bike
Honda Dax
Previously Owned Bikes: Triumph Tiger Cub, Garelli Tiger Cross, Triumph Trophy 650, Honda CB250 G5, Honda CB750 K7, Yamaha DT175MX, Honda CB250 Super Dream, Yamaha RD350LC YPVS, Honda XR250, Yamaha XT600, Suzuki PE175, Yamaha YZ125, Yamaha RD500 V4, Yamaha XT600 Tenere (3AJ), Kawasaki ZX10, BMW R100GS PD, Honda XR600, Honda Varadero, Honda Africa Twin, Honda Transalp, Triumph Thunderbird, Ducati 900 Superlight FE, Ducati 750 SS, Honda Fireblade, Kawasaki Versys 650, Suzuki GT750 Kettle, Super Tenere
Location: Tenereland, North East England.

Re: What is Just Dan up to now :headslap:

Post by GeoffD »

:popcorn2:


Love it Dan.... I had a R100GS/PD.... 20 yrs back, god I wish I still had it
The future is not what it used to be....
User avatar
Just Dan
Founding Member
Founding Member
Posts: 216
Joined: Tue Mar 29, 2011 7:30 am
Location: Hobart
Contact:

Re: What is Just Dan up to now :headslap:

Post by Just Dan »

I guess the big question is in frame painting. Powder coat or 2 pak ? Andrew just got a quote for his BM frame for 2 pak = $1500 or £800 or powder coating for $500 or £270 :omg:
Bacon and eggs...A day's work for a chicken, a lifetime commitment for a pig.
User avatar
Mezo
Dashingly Handsome
Dashingly Handsome
Posts: 6108
Joined: Wed Mar 23, 2011 11:01 am
What Bike or Bikes Do You Own?: Kymco agility 125 ;-)
Previously Owned Bikes: Honda SS50, Suzuki TS50, Honda CB100, Honda CR125RZ, Yamaha YZ125, Kawasaki KX250, Suzuki TL1000S, Ducati 900SS, Ducati 900SL, a few Tenere`s.
Location: Queensland Australia
Contact:

Re: What is Just Dan up to now :headslap:

Post by Mezo »

That don't sound right Dan, 1500 in 2pak just for a frame? :wtf:

Mezo.
"A wise man makes his own decisions, an ignorant man follows public opinion"
Post Reply